The AT2020PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2020 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with an XLR cable.
AT2020 Cardioid Condenser Microphone
• Ideal for vocal pickup
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
ATH-M20x Professional Monitor Headphones
• 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Tuned for enhanced low-frequency performance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• Convenient single-side cable exit
Adjustable Studio Boom Arm
• Full 360 rotation
• Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
• Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
• Included USB cable (Mini-B to Type A) extends 3 m (10') from the base of the boom arm
• Internal cable management for clean desk appearance
• Standard 5/8"-27 thread for easy attachment of the included microphone stand clamp
AT2020 Microphone Specifications
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D.
Noise: 20 dB SPL
Dynamic Range (typical): 124 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom-Power Requirements: 48V DC, 2 mA typical
Weight: 345 g (12.1 oz)
Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Included Accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case-Style: R7